Solders

 

Sil-Pure Lead Free

Sil-Pure® was developed to meet market demands for a safe and easy to use solder for drinking water systems and other applications. While decreasing corrosion, silver gives the solder increased flow rate and durability. Sil-Pure® is a lead-free and antimony-free, non-toxic solder which contains the same safe metals used in dental fillings. It offers a low melting point and wide melting range for excellent flow and control.

Safety Data Sheet:

WSPSP.pdf

Standards:

Wire Diameter: 1/8"
Weight: 1lb, 5lb, 20lb Spools

Nev’r Leak Lead Free

No Lead! No Antimony! Safe for potable water applications. Nev'r Leak is an economical Lead Free solder that flows better than the traditional 95/5, thus easier to use, which saves you time and money. Nevr’ Leak is 97% Tin and 3% Copper and is proven to be a strong and reliable solder for all your potable water needs. It has been used in the plumbing industry for many years all over North America.

Safety Data Sheet:

WSPNL.pdf

Standards:

Wire Diameter: 1/8"
Weight: 1lb, 5lb, 20lb Spools

95/5 Lead Free

Standard Lead Free Solder is an environmentally safe solder. It meets all the requirements of being lead free and zinc free. It has been specifically formulated to meet all requirements of Government safe drinking water laws which ban the use of lead-bearing Solders. Standard Lead Free Solder will produce strong, dependable joints, and will also avoid corrosion problems. These joints will be completely safe for drinking water systems. Check out the physical characteristics of it in the below table.

Safety Data Sheet:

WSP955.pdf

Standards:

Wire Diameter: 1/8" 
Weight: 1lb, 5lb, 20lb Spools

50/50 Tin/Lead

50/50 tin/lead Solder is the most popular all-purpose high-grade solder, used on copper and brass, especially on plumbing and electrical work.
Tin Lead Solder gives a strong joint under most conditions.

Safety Data Sheet:

WSP5050.pdf

Standards:

Wire Diameter: 1/8"
Weight: 1lb, 5lb, 20lb Spools

 

Tin/Lead

30% Tin, 70% Lead

40% Tin, 60% Lead

60% Tin, 40% Lead

WSP3070.pdf

WSP4060.pdf

WSP6040.pdf

 

50% Tin, 50% Lead Acid Core

60% Tin, 40% Lead Acid Core

 
 WSP6040.pdf  WSP6040.pdf  
 

50% Tin, 50% Lead Resin core

 WSP6040.pdf

60% Tin, 40% Lead Resin core

 WSP6040.pdf

 

BAR SOLDER AND SOLDER PASTE

50/50 BAR SOLDER

50/50 Bar Solder was developed for non-potable water applications only.

• Melting Point: Solidus: 361°F(183°C) Liquidus: 421°F (216°C)

DESCRIPTION CODE CASE/QTY
50/50 Bar Solder BS5050C 50 lb

SOLDER PASTE

Petroleum based Lead Free Solder Flux that can be used both with Lead free and Tin/Lead solders. Strong and fast acting; cleans, fluxes and helps reduce oxidation of metal after proper surface preparation has been completed. Exceeds ASTM B813 specifications

DESCRIPTION CODE CASE/QTY
Solder Paste 56g PAS05 10
Solder Paste 500g PAS5 10

See our Plumbing Brochure.

Available in different sizes. Please contact us for more information.